BLXDG - 1075/1065/1090/4050/5018/5028/5046/5090/ (S
- MSDS: BLXDG
- Manufacturer: XEROX CORP
- Product Name: 1075/1065/1090/4050/5018/5028/5046/5090/ (S
- National Stock Number: 3610-00N023521
Product Identification
Product ID:1075/1065/1090/4050/5018/5028/5046/5090/ (S
MSDS Date:07/20/1988
FSC:3610
NIIN:00N023521
MSDS Number: BLXDG
Responsible Party
ROCHESTER, NY 14644-1877
US
Emergency Phone: 716-422-2177
Info Phone: 800-828-6571
Cage: 0E6G9
Contractor
Telephone: 800-828-6571/716-422-2177
Cage: 26921
Ingredients
POLYESTER FILM
Fraction By Weight: 65-70%
POLYCARBONATE
Fraction By Weight: 20-25%
TERTIARY DIAMINE
Fraction By Weight: 10-15%
POLYVINYL CARBAZOLE
CAS: 25067-59-8
Fraction By Weight: <5%
SELENIUM
CAS: 7782-49-2
RTECS: VS7700000
Fraction By Weight: <1%
OSHA PEL 0.2 MG/M3
ACGIH TLV: 0.2 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
LD50 LC50 Mixture:LD50: (ORAL, RAT) >5 G/KG.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WHEN USED AS INTENDED, DOES NOT
PRESENT HEALTH OR SAFETY HAZARD.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE
Medical Cond Aggravated by Exposure:NONE WHEN USED AS DESCRIBED BY
PRODUCT LITERATURE.
First Aid
First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN: WASH
WITH SOAP AND WATER. INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING
(GIVE O*2/ARTIFICIAL RESPIRATION). CALL MD . INGEST: CALL MD
IMMEDIA TELY .
Fire Fighting
Extinguishing Media:WATER, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WHEN IN A MACHINE, TREAT AS AN ELECTRICAL
FIRE.
Unusual Fire/Explosion Hazard:EXPOSURE TO HIGH TEMPERATURES CAN RESULT
IN MELTING AND PYROLYSIS. FUMES MAY CAUSE RESPIRATORY SYMPTOMS.
DELAYED EFFECTS MAY OCCUR UP TO 72 HOURS.
Accidental Release
Spill Release Procedures:PARTICLES DETACHED THROUGH PHYSICAL DAMAGE MAY
BE DISPOSED OF AS INDICATED BELOW.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID EXPOSURE TO HIGH TEMPERATURES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHEN USED AS INTENDED.
Ventilation:NONE REQUIRED WHEN USED AS INTENDED.
Protective Gloves:NONE REQUIRED WHEN USED AS INTENDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED WHEN USED AS INTENDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO: PHOTORECEPTOR, 1R88.
Chemical Properties
HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID; ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Stability Condition to Avoid:FLAMES, DIRECT HEAT,EXP TO HIGH
TEMPERATURES
Hazardous Decomposition Products:OXIDES OF SELENIUM.
Disposal
Waste Disposal Methods:CASUAL DISPOSAL LEADING TO INCINERATION OR
REGULAR LANDFILL ACCORDING TO LOCAL, STATE, AND FEDERAL ORDINANCES.
(PHOTORECEPTORS MUST NOT BE INCINERATED IN QUANTITIES GREATER THAN
150 LB. IN ONE HOUR AC CORDING TO NEW YORK STATE STANDARDS.)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.